Southbend SB1001 - Manual (Page 48)

-46-
For Machines Mfg. Since 8/11 Model SB1001 8K ™ Lathe A C C E S S O R I E S
Some aftermarket accessories can be installed
on this machine that could cause it to function
improperly, increasing the risk of serious
personal injury. To minimize this risk, only
install accessories recommended for this
machine by South Bend.
This section includes the most common
accessories available for your lathe, which may
be available through your local South Bend
Lathe Co. dealer. If you do not have a dealer in
your area, please call us at (360) 734-1540 or
email us at [email protected].
SB1468—5" 4-Jaw Chuck D1-3 for SB1001
SB1469—6" Faceplate D1-3 for SB1001
SB1281—MT#2 High-Performance Live Center
Set
• Shafts are made of alloy steel and vacuum
heat-treated to HRC60° ± 1 for high rigidity
and durability.
• Centers use a combination of roller bearings,
thrust ball bearings, and ball bearings.
• Waterproof design.
Figure 74. SB1281 MT#2 High-Performance Live
Center Set.
SB1365—Way Oil for Lathes
Engineered for high pressure exerted on
horizontal or vertical ways and slides. Protects
against rust and corrosion. Ensures stick-free,
smooth motion which maximizes finishes and
extends the life of your machine. Will not gum
up! (ISO 68 equivalent)
Figure 72. SB1365 Way Oil for Lathes.
SB1470—Steady Rest for SB1001
SB1471—Follow Rest for SB1001
Figure 75. 4-Jaw Chuck and Faceplate for SB1001.
SB1468
SB1469
Figure 73. Steady rest and follow rest for SB1001.
SB1470
SB1471
Accessories