Southbend SB1001 - Manual (Page 72)

-70-
For Machines Mfg. Since 8/11 Model SB1001 8K ™ Lathe P A R T S
Labels
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
REF PART # DESCRIPTION REF PART # DESCRIPTION
801 PSB1001801 MACHINE ID LABEL 810 PSBLABEL13VS DOOR CLOSED LABEL
802 PSB1001802 EMERGENCY STOP LABEL 811 PSB1001811 SB NAMEPLATE CURVED BRASS
803 PSB1001803 SPINDLE SPEED DIAL LABEL 812 PSB1001812 TRAINED PERSONNEL NOTICE LABEL
804 PSB1001804 SPINDLE SWITCH LABEL 813 PSBLABEL01VS READ MANUAL LABEL
805 PSB1001805 THREE V-WAY DESCRIPTION LABEL 814 PSBLABEL03VS FACESHIELD/GLASSES LABEL
806 PSB1001806 THREAD DIAL CHART LABEL 815 PSB1001815 CHUCK KEY HAZARD LABEL
807 PSB1001807 FEED-THREAD CHART LABEL 816 PSBLABLE08VS ENTANGLEMENT LABEL
808 PSBPAINT-01 SB GRAY TOUCH-UP PAINT 817 PSB1001817 120V ELECTRICITY LABEL
809 PSBLABEL02VS DISCONNECT POWER LABEL
801
802
803
804
805
806
807
808 809 810
811
812
813 814
815 816
817