Southbend SB1001 - Manual (Page 8)

-6-
For Machines Mfg. Since 8/11 Model SB1001 8K ™ Lathe I N T R O D U C T I O N
Carriage Tailstock
E. 4-Way Tool Post: Mounts up to four cutting
tools at once that can be individually indexed
to the workpiece.
F. Compound Rest Ball Handle: Moves the tool
toward and away from the workpiece at the
preset angle of the compound rest.
G. Carriage Lock: Secures the carriage in place
when the carriage should not move.
H. Thread Dial and Chart: Dial indicates when
to engage the half nut during threading
operations. Chart indicates on which thread
dial reading to engage the half nut for
specific inch thread pitches.
I. Half Nut Lever: Engages/disengages the half
nut for threading operations.
J. Carriage Handwheel: Moves the carriage
along the bedway.
K. Cross Slide Ball Handle: Moves the cross
slide toward and away from the workpiece.
Figure 3. Carriage components.
E
F
H
G
I
J
K
Figure 4. Tailstock components.
L
N
O
P
M
Q
L. Quill: Moves a tool or center toward or away
from the workpiece.
M. Tailstock Lock Nut: Secures the tailstock in
position along the bedway.
N. Quill Lock Lever: Secures the quill in
position.
O. Quill Ball Handle: Controls the movement of
the quill.
P. Offset Scale: Indicates the relative distance
of tailstock offset from the spindle centerline.
Q . Tailstock Offset Set Screw (1 of 2): Adjusts
the tailstock offset left or right from the
spindle centerline.