Socket Mobile Series 9 - Manual (Page 22)

STEP 4: Assemble and Put on the CRS
Please refer to the instructions in Chapter 2.
STEP 5: Scan Data into Your Application
1. Start the Windows application that you want to enter scanned data into
(e.g., Excel, Notepad, etc.). Make sure a document or spreadsheet is open.
2. Place the cursor where you want data from the next scan to go. If using
Excel Mobile, you may want to increase the width of the column to fit
all of the data from a bar code.
3. Press the trigger button and aim your finger at the bar code. The red
laser beam should cover the entire width of the bar code. See Chapter 1
for scanning tips.
22