Step 4: start socketscan and connect to crs, Step 5: assemble and put on the crs 40, Step 6: scan data into your application 40 – Socket Mobile Series 9 User Manual
Page 40: Step 5: assemble and put on the crs, Step 6: scan data into your application
Advertising
5.
The task tray icon at the bottom of your screen will change
to an image of a ring above a bar code to indicate that
SocketScan is connected to the CRS.
STEP 5: Assemble and Put on the CRS
Please refer to the instructions in Chapter 2.
STEP 6: Scan Data into Your Application
1. Start the Windows application that you want to enter scanned data into
(e.g., Excel, Notepad, etc.). Make sure a document or spreadsheet is
open.
2. Place the cursor where you want data from the next scan to be entered.
3. Press the trigger button and aim your finger at the bar code. The red
laser beam should cover the entire width of the bar code. See Chapter 1
for scanning tips.
40
Advertising