Socket Mobile Series 9 - Manual (Page 58)

SYMPTOM: While scanning with the CRS, I turned off the host
device, or my host device entered suspend mode. Now the CRS
won’t reconnect to my host device.
POSSIBLE REASONS SOLUTION
There is a problem with the
Broadcom (Widcomm) stack on
some devices where the CRS
can be discovered but fails to
communicate. Affected units
include the HP iPAQ models
h221X with ROM version 1.10
and h1945. Soft reset the Pocket PC by
pressing the reset button.
SYMPTOM: My Pocket PC shows an error message saying that
there are insufficient device resources.
POSSIBLE REASONS SOLUTION
Some HP iPAQ Pocket PCs are
not compatible with the Socket
Cordless Ring Scanner. The CRS will not work with your
Pocket PC at this time.
58 | APPENDIX F TROUBLESHOOTING