Socket Mobile Series 9 - Manual (Page 64)

CE Marking & European Union Compliance
Products intended for sale within the European Union are marked with a
CE Mark which indicates compliance to applicable Directives and
European Normes (EN), as follows. Amendments to these Directives or
ENs are included: Normes (EN), as follows:
Applicable Directives:
• Radio and Telecommunications Terminal Equipment Directive
1999/5/EC
• Low Voltage Directive 73/23/EEC
Applicable Standards:
• EN 55 022 – Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.
• ETSI EN 301 489-17 V 1.2.1 (2002-08) – Electromagnetic
Compatibility (EMC) standard for radio equipment and services; Part
17: Specific Conditions for 2.4 GHz wideband transmission systems and
5 GHz high performance RLAN equipment.
• ETSI EN 300 328 V1.6.1 – Electromagnetic compatibility and Radio
spectrum Matters (ERM); Wideband transmission systems; Data
transmission equipment operating in the 2.4 GHz ISM band and using
wide band modulation techniques; Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive.
• EN61000-4-2 – Electromagnetic Compatibility for Industrial Process
Measurement and Control Equipment, Part 2: Electrostatic Discharge
Requirements.
• EN61000-4-3 – Electromagnetic Compatibility for Industrial Process
Measurement and Control Equipment, Part 3: Radiated Electromagnetic
Field Requirements.
LASER DEVICE:
The Socket bar code scanning product(s) described in this User Guide
contain a Symbol SE955 laser scan engine.
For the Class 1 version of this engine, the following applies:
• “Complies with 21CFR1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated July 26, 2001. “
• “EN60825-1:1994+ A1:2002 +A2:2001”
• “IEC60825-1:1993+A1:1997+A2:2001”
• “Class 1 Laser devices are not considered to be hazardous when
used for their intended purpose. The following statement is
required to comply with US and international regulations:
64