Savin 2027 User Manual

Page 30

Advertising
background image

Troubleshooting

26

4

DIMM has a problem.

An error has occurred in the
DIMM inside the machine.

Contact your sales or service
representative.

Driver setting error. (Memo-
ry)

There is an error in the down-
loaded font(s).

Reset the parameter for down-
loading fonts.

Insufficient memory or memo-
ry settings for the printer driv-
er may not match memory
actually installed.

Specify correct memory capac-
ity on the [Change Accesso-
ries...]

tab in the RPCS™

printer driver.

To print the image correctly,
increase memory capacity, or
reduce resolution image.

Duplex has been cancelled.

Duplex printing has been can-
celed.

Check the paper used is suita-
ble for duplex printing. Or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.

Ethernet board has a prob-
lem.

An error has occurred in the
Ethernet board.

Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.

Exceeded max capacity of
document server. Cannot
stored.

Hard disk drive capacity ex-
ceeded storing to the Docu-
ment Server.

Delete some files stored in the
Document Server or decrease
the file size to be downloaded.

Exceeded max number of
files of document server. Can-
not stored.

The maximum number of files
stored in the Document Server
has been exceeded.

Delete some files stored in the
Document Server.

Exceeded max number of
pages of document server.
Cannot stored.

The maximum number of pag-
es stored in the Document
Server has been exceeded.

Delete some pages stored in
the Document Server or de-
crease the number of pages to
be downloaded.

Exceeded max. stored files in
sample print and locked
print.

The maximum number of
stored files has been exceeded
during Sample Print or
Locked Print.

Delete some stored files or re-
duce file sizes.

Exceeded max. stored pages
in sample print and locked
print.

The maximum number of
stored pages has been exceed-
ed during Sample Print or
Locked Print.

Reduce the number of pages
to be printed.

Messages/Second messages

Causes

Solutions

Advertising