Savin 2027 - Manual (Page 33)

Error & Status Messages on the Display Panel
29
4
Selected paper tray is in use
for another function. Please
wait. The specified paper tray is in
use by another function, such
as the copier function. Wait until the other function
has finished using the speci-
fied paper tray.
Shift tray has a problem. Call
service representative.
^
A malfunction occurs when
using the shift function. Contact your sales or service
representative.
Staple has been cancelled. Staple printing has been can-
celed. Check the paper feed direc-
tion, paper orientation and
stapling position.
Staple unit is in use for anoth-
er function. Please wait. The staple unit is in use by an-
other function, such as the
copier function. Wait until the other function
has finished using the staple
unit.
DToner is almost empty.
The toner has almost run out. Replace the toner cartridge
with a new one.
Turn the main power switch
off, then check the card. The IEEE 802.11b card may
have come off, or an error may
have occurred in the IEEE
802.11b card. Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Unauthorized user access.
Print job has been cancelled. Print job canceled due to user
restrictions. Check the User Code permis-
sion status.
USB has a problem. An error has occurred in the
USB interface. Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Messages/Second messages Causes Solutions