Savin 2027 - Manual (Page 40)

Troubleshooting
36
4
It takes a long
time to complete a
print job. Photographs and other data intensive pages take a long time for the ma-
chine to process, so simply wait when printing such data.
Changing the following settings with the printer driver may help speed up
printing:
• PCL 6/5e
Select the lowest value for [Resolution] on the [Print Quality] tab in the
printer properties dialog box.
• PostScript 3
Select the lowest value for [Resolution] on the [Print Quality] tab in the
printer properties dialog box.
Select [PostScript (optimize for speed)]for [PostScript output format:] on the
[PostScript]
tab in the printer properties dialog box.
• RPCS™
Select the lowest value for [Resolution] on the [Image Adjustments] tab in
the [Change User Settings...] dialog box on the [Print Quality] tab in the
printer properties dialog box.
Select [Fast] for [Document type] list on the [Print Quality] tab in the printer
properties dialog box.
See the printer driver Help.
The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Simply wait until printing
resumes.
It takes too much
time to resume
printing. The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Simply wait until printing
resumes.
The machine was in Energy Saver mode. To resume from Energy Saver
mode, it has to warm up, and this takes time. To disable Energy Saver
mode, select [Off] for Energy Saver 1 in the System Settings menu. See Gen-
eral Settings Guide.
Paper is not fed
from the selected
tray. When you are using a Windows operating system, printer driver settings
override those set using the display panel. Set the desired input tray using
the printer driver.
See the printer driver Help.
Optional compo-
nents connected to
the machine are
not recognized
when using Win-
dows 95/98/Me,
Windows
2000/XP, and
Windows NT 4.0. You have to configure the option setup in printer properties when bidirec-
tional transmission is not enabled.
See the printer driver Help.
Images are print-
ed in the wrong
orientation. The feed orientation you selected and the feed orientation selected in the
printer driver's option setup might not be the same. Set the machine's feed
orientation and the printer driver's feed orientation accordingly.
See the printer driver Help.
Problem Causes and Solutions