Savin 2027 - Manual (Page 41)

Other Printing Problems
37
4
Note
❒ If the problem cannot be solved, contact your sales or service representative.
The printed image
is different from
the image on the
computer's dis-
play. With certain functions, such as enlargement and reduction, image layout
might be different to that on the computer display.
You might have selected to replace True Type fonts with machine fonts in
the printing process.
To print an image similar to that of the computer display, make settings to
print True Type fonts as an image.
See the printer driver Help.
No transmission
when using 1394
interface connec-
tion Check using the following procedure:
A Confirm the IEEE 1394 interface cable is connected securely.
B Restart the computer.
If the error occurs even after executing the above operation, proceed to
the following steps.
C Unplug the IEEE 1394 interface cable connected to the computer.
D Run the utility tool for the IEEE 1394 interface board, which is stored in
the following path on the CD-ROM “Printer Drivers and Utilities”:
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
E Restart the computer.
Printing stops and
a paper error is
displayed if the
custom size paper
in the paper feed
tray is specified
when printing
with the Post-
Script 3 printer
driver. Follow the one of the procedures below:
• Press [Job Reset] on the display panel to stop printing. Place the custom
size paper in the bypass tray, and then start printing.
• Select the paper feed tray with custom size paper, and then press [Con-
tinue] to force printing.
When connecting
the machine using
USB 2.0, the first
page of a print job
that contains a
large volume of
data is printed,
but the remaining
pages are not. Check that USB Printing Support is installed on your computer.
Reference
See “Installing the Printer Driver Using USB”, Printer Reference 1.
Problem Causes and Solutions