Studer Innotec RCC-03 - Manual (Page 17)

RCC
17
BASIC DISPLAYS
When the remote control is connected to an Xtender, it is possible to access different display
menus divided into distinct categories.
Real time information displays on the operating mode of
the installation
The history of events occurring in the installation
Adjustment of RCC remote control options
Adjustment of configurations on the Xtender(s)
Information on the system
To go from one display to the other, use the keys UP and DOWN on the RCC remote control.
To visualize or modify the options of one of the basic displays, press the key SET when this one is
displayed.
In the case of a system in 3-phase or in parallel, the following displays are available too:
Real time display of information on the state of running of the
installation.