Studer Innotec RCC-03 - Manual (Page 18)

Studer Innotec
18
ACTIVATING AND DEACTIVATING THE COMBI XTENDER
When one of the displays is visible, it is possible to activate or deactivate the Xtender. To do this,
simply press the key ESC. The key request on the screen indicates whether you are going to
activate or deactivate the unit.
Once the key has been pressed, you must confirm your
choice using the key YES. If you do not want the action to
be carried out, it can be cancelled by pressing the NO
key.
Note: This is a comprehensive signal and leads to the stoppage or starting of all
Xtenders connected to the remote control.