Studer Innotec RCC-03 - Manual (Page 7)

RCC
7
FOREWORD
This manual contains information relating to the functioning of the RCC-02 and RCC-03 remote
controls.
The use of certain functions sometimes requires increased knowledge in various fields. This manual
cannot provide this. In case of doubt, please contact your reseller or installer.
C
ONVENTIONS
This symbol is used to indicate the presence of a dangerous voltage that is sufficient
to constitute a risk of electric shock.
This symbol is used to indicate a risk of material damage.
This symbol is used to indicate information that is important or which serves to
optimise your system.
Terminology:
The following terms are used in the manual to provide greater clarity:
RCC is used to indicate the remote control RCC-02 or RCC-03 if the description applies to both
models.
Installation is used to describe all the electrical equipment connected together. This may be the
source (public grid or generator), and one or more Xtender(s) with or without remote control as well
as electrical consumers.
System is used to describe the entirety of Xtenders with or without remote control.
Xtender or combi is used to describe one or more Xtender(s) connected together.
P
RODUCT RECYCLING
The RCC remote control conforms to the European directive 2002/95/EC on hazardous substances
and does not contain the following elements: lead, cadmium, mercury, hexavalent chrome, PBB or
PBDE.
To dispose of this product, please use the service for the collection of electrical waste and observe
all applicable obligations according to the place of purchase.