Studer Innotec RCC-03 - Manual (Page 44)

Studer Innotec
44
INFORMATION ON THE SYSTEM
The system information allows you to check the versions of the various elements of your installation.
R
EMOTE CONTROLS
You will receive information on the hardware and software versions for each remote control.
Furthermore, you have access to its unique ID number. This unique number is marked FID followed
by its ID.
X
TENDER
For each Xtender connected at the remote control, you can consult the following information:
the hardware version of the motherboard itself as well as the powerboard, the software version of
the Xtender program and the unique ID of the Xtender. This unique number is also marked FID and
followed by its ID.