Kenwood HM-381MD - Manual (Page 12)

12
Preparation section
System connection
Connection of Other Accessories
(Commercially Available Parts)
FM outdoor antenna
Lead the 75
Ω
coaxial cable con-
nected to the FM outdoor antenna
into the room and connect it to the
FM 75
Ω
terminal. Please remove the
indoor antenna after an outdoor an-
tenna has been installed.
Antenna adaptor (optional)
Europe, and U.K.
Audio cord
1.In case an associated system component is connected, also read
the instruction manual of the component.
2.Insert the optical-fiber cable straight into the connector until it clicks.
3.Be sure to attach the protection cap when the connector is not used.
4.Never band or bundle the optical-fiber cable.
Notes Notes
POWER cord
TO WALL AC OUTLET
Audio output
VCR, Analog turntable with built-in
RIAA equalizer (optional P-110), etc.
Other countries
CAUTION
Note on Connection
Connect the components as shown in the diagram.
Only plug the power cord into a power outlet once
connections are completed.
SUPER WOOFER
FM
300 Ω
FM
75 Ω
AM
GND
ANTENNA
AUX INPUT
R L
AC 110–120V AC 220–240V
SPEAKERS
(6–16 Ω )
+
–
–
+
R
L
SUPER
WOOFER
PRE OUT
MANUAL AUTO
PANEL
OPEN/CLOSE
FM
300
Ω
FM
75 Ω
AM
GND
GND
AM
FM
75
Ω
10mm 10mm
AUX INPUT
R L