Kenwood HM-381MD - Manual (Page 44)

HM-381MD (En)
44
Application section
Convenient Recording Methods
Selection of the Recording Type
This unit provides the following recording fea-
tures in addition to normal recording. Select the
appropriate method according to the purpose of
recording.
\
\
\
\
\
To record CD with a simplified method
One-touch recording (CD
=
MD/ CD
=
TAPE) t
To record CD simultaneously onto an MD and tape
Twin recording onto MD and tape (TWIN REC) (CD
=
MD, TAPE) y
One-touch recording (all-track recording)
One-touch recording (single-track recording)
TWIN REC (all-track twin recording)
TWIN REC (single-track twin recording)
Program recording
To record desired CD or MD tracks by reordering them
Program recording (CD
=
MD/ CD
=
TAPE / MD
=
TAPE) ui
One-touch recording of an entire CD onto an MD
or tape.
One-touch recording of the CD track being
played onto an MD or tape.
(This is convenient for recording of desired
tracks from a disc being heard for the first time.)
Simultaneous recording of an entire CD onto an
MD and tape.
Simultaneous recording of the CD track being
played onto an MD and tape.
(This is convenient for recording of desired
tracks from a disc being heard for the first time.)
Recording of programmed tracks in the pro-
grammed order.
(Convenient for recording only the desired CD
or MD tracks in the desired order.)
Program recording can be used in combination
with the ”One-touch recording” or ”
Twin record-
ing onto MD and tape (TWIN REC)”.
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
recording is not possible. Please use single-side recording if this is to be avoided.
Note Note Note
Note that this cassette deck cannot record onto
Metal tapes.
Note Note
÷ One-touch recording from an MD to a tape is not possible.