Kenwood HM-381MD - Manual (Page 30)

HM-381MD (En)
30
Basic section
Recording on MD This unit cannot record audio in monaural mode.
MD recording is possible as “digital recording”, where the digital signal of the CD is used as it is, and as
“analog recording”, where the analog signal of a broadcast etc. is converted to a digital signal.
Let's recording
1. Make the preparations for recording.
In the direction of the arrow
1 Open the write protect tab of the Mini Disc to make it recordable.
8
2 Load the Mini Disc.
2. Select the source to be recorded.
Select an input source other
than “MD”
TUNER (Broadcasts) : Only analog recording
CD : Only digital recording
TAPE : Only analog recording
AUX (tape etc.) : Only analog recording
Lights
÷ If a CD or tape has already been loaded,
it starts to play now. Press the 7 key to
stop it.
÷ If the CD input is selected, the digital
input is recorded automatically.
The character information
display shows the recording
input source.
Pause the recording
Stop the recording
CAUTION
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force load a MD in standby mode, otherwise malfunction will result.
Example:
To select the CD input
Stop the recording Pause the recording
2 2
3 3
2 2 4 4
1 1
2 2
CD
6
2 2
C D • • • • • •