Kenwood HM-381MD - Manual (Page 15)

Preparation section
HM-381MD (En)
15
Controls and indicators
2 2 2 2
panel
open / close
FM 300 Ω
FM 75 Ω
AM GND
ANTENNA
AUX INPUT
+
SPEAKERS (6–16 Ω )
+
–
–
+ R
L
SUPER
WOOFER
PRE OUT
MANUAL AUTO PANEL
OPEN/CLOSE
MANUAL AUTO
Turning the knob switches the function as shown
in the character information display.
TAPE RVS. ?
¶
O.T.E. ?
t
A. MEMORY (or A. PRESET) ? ª
(Only when the TUNER input is selected)
AUX LEVEL
?
„
(Only when the AUX input is selected)
BALANCE
? Œ
TIMER SET ? ‰
A.P.S. SET ?
(
÷ The function of the control knob returns to the normal
mode when it has not been operated for 5 seconds.
* About the VOLUME/multi control (up/down) knob
After selecting the function of this knob with the
“ menu ” key, select the desired control item by turn-
ing the “ VOLUME/multi control (up/down) ” knob.
To set or enter the setting of the selected item, press
the
“ set/demo ” key.
1 CD cover open (0)
Press to open the CD player cover.
2 Display
3 Tape record key (TAPE rec) ‹
Press to start recording. Pressing the key during recording
stops it after leaving a non-recorded space (blank) of about 4
seconds.
4 “set/demo” key
Press to set or enter an item selected with the “VOLUME/
multi control“.
Used for demonstration ON/OFF.
5 “menu” key %
Press to switch the function of the “VOLUME/multi control
(up/down)” knob.
This key is also used when setting the time of the day.
6 “panel open / close” key
7 CD play/pause key (CD 6) )
Press to select the CD input and start CD playback.
Press during CD playback to let it pause temporarily.
8 MD play/pause key (MD 6) ™
Press to select the MD input and start MD playback.
Press during MD playback to let it pause temporarily.
Press during MD recording to let it pause temporarily.
9 Tape play key (TAPE)/
TAPE direction indicator §
0 Stop key (7)
! Cassette holder
Press the area marked “ 0 push open” to load or eject a tape.
@ “phones” jack
Headphones with a stereo mini plug (optional) can be con-
nected.
# Skip/search keys (4, ¢/1, ¡)
During CD or MD operation : ¡£
Press to skip tracks in the forward or backward direction.
During TAPE operation :
¶
Press to search in the forward or backward direction.
During TUNER operation : •
Press to receive a preset station.
These keys are also used during MD editing, track number
selection and title character selection.
$ “repeat” key fi°
Used for repeated playback of CD or MD.
% MD record key (MD rec) ⁄
Press to start MD recording.
^ “sound” key (
Used for switching the EX.BASS play and LOUDNESS play.
& “TUNER/band” key •
The received broadcasting band is switched.
Press to select the TUNER input.
AUX input key
Press to listen to the input source connected to AUX (analog
external).
* MD eject key(0)
This key is pressed to remove disc.
( Mini Disc insertion slot
) “VOLUME/multi control (up/down)” knob %
Normally this is used for volume adjustment.
¡ Remote sensor
™ “on/standby” key
The system is switched ON and STANDBY.
Standby / timer indicator
Light in standby mode of power.
Red :Normal standby mode
Orange :O.T.T. standby
:Program timer standby
Green :Power ON mode
*
About the REVOLVING CONTROL PANEL
menu
set/demo
VOLUME / multi control
REVOLVING CONTROL PANEL
(close state)
÷ The REVOLVING CONTROL PANEL is closed when
the power supply is in STANDBY mode.
÷ When the power is switched ON, the REVOLVING
CONTROL PANEL opens.
÷ When the power is ON, the panel opens and closes
alternately each time the "panel open / close" key is
pressed.
AUTO MANUAL
÷ When the power is ON, the panel opens and closes
alternately each time the "panel open / close" key
is pressed.