KITCHENAID KPFD200 - Manual (Page 49)

47
C
ARE
AND
C
LEANING
Attach the Mixing Blade and Dispenser Assembly
1. Insert the mixing blade into the freezing cylinder. Make certain
the end with the square keyhole is inserted into the freezing
cylinder first.
2. When the mixing blade is fully inserted into the cylinder, rotate
the blade until you feel the motor shaft at the back of the
freezing cylinder slip into the mixing blade keyhole.
5. Apply a light coating of vegetable oil to the O-ring on the bottom
of the funnel lid. This will lubricate the funnel lid and make it easy
to remove. Then place the lid into the ingredient funnel.
6. Fit the large O-ring onto the back of the dispenser assembly.
Lubricate O-ring
with Vegetable Oil
Continued…