Konica Minolta Chroma Meter CS-200 - Manual (Page 100)

98
Com
mun
icati
on
Connecting to PC
This instrument can be used together with PC for mutual communication. Use USB cable
(2m) IF-A17 supplied as standard accessory for this purpose.
USB cable is allowed to plug/unplug while power is on, but it is recommended to switch
power off in this case.
Operation Procedure
1.
Switch power OFF (O).
2.
Left protect cover and connect USB cable
to USB connector of this instrument.
3.
Make sure that USB cable is all
seated to USB connector.
Communication interface in this instrument conforms to USB1.1.
Hold USB cable plug in unplugging. Do not pull cord part.
Plug USB cable to fit the connector entry point.
Any USB port on PC may be usable if there are multiple on PC. However, normal opera-
tion may not be secured if used with other USB units than CS-200.