Konica Minolta Chroma Meter CS-200 - Manual (Page 108)

106
De
scr
ipti
on
Measurement of Object Color
This instrument can perform simple measurement by utilizing user calibration function.
This is also available by using standard accessory data management software CS-S10w
Standard or optional CS-S10w Professional. Measured data is evaluated based on lumi-
nance which has been stored as light source data in CS-S10w. See instruction manual of
CS-S10w for details.
• Set while calibration plate and object on the same position with the same angle from
this instrument. Uniform illumination and measurement conditions of white calibration
plate and those of object. If not, measurement data may vary, causing incorrect data.
• Keep illumination light source as stable as possible with fixed voltage power source
during measurement.