Kenwood C-707I - Manual (Page 12)

12 C-707I
Main Connections
Connecting the System
Push into
the slot.
AM loop antenna
1 Connect the lead to the [FM75Ω] terminal.
2 Find the location that gives the best
reception.
3 Secure the antenna as high up as possible.
FM indoor antenna
Right speaker Left speaker
Caution for
Connection
Do not plug the AC power cord into an AC wall outlet until all the connections are completed.
Before disconnecting any cords or cables, always turn the system off and unplug the power cord
from the AC wall outlet.
See <Connecting the AC
adapter>.
Red
band
The speaker cords are connected at the factory.
Red
band
en02_c-707i.indd 12 en02_c-707i.indd 12 12/28/2007 4:14:39 PM 12/28/2007 4:14:39 PM