Kenwood C-707I - Manual (Page 32)

32 C-707I
Connect a USB fl ash memory or the cable of a USB audio
player to the [
USB] port on the front panel of the main unit.
Playing back from a USB device
1 1
2 2
This section explains how to play MP3 or WMA audio fi les from USB fl ash
memory or a USB mass storage class compliant digital audio player.
Also refer to the instruction manual that comes with the USB device you are
connecting. z
Press the [USB E] key.
The system fi nds the MP3 and WMA audio fi les on the connected device and
start playback.
See page 38 for the playback sequence when there are multiple folders or
audio fi les on the connected device.
Playback does not start if there are no playable MP3 or WMA audio fi les on the
connected device.
z
z
This section explains how to connect USB fl ash memory or a USB mass storage class compliant digital
audio player to the system and play its MP3 or WMA audio fi les.
USB
Before connecting a USB device to the system, turn off both the system and
the USB device. z
Depending on the connected device, the number of fi les, and other factors, reading
of fi les can take some time.
If you are using a Kenwood digital audio player, a USB
connection mode selection screen may appear. Select
“Storage Mode” and then press the [USB
E] key again.
Do not disconnect the USB device while playback is in progress. Doing so can cause
malfunction.
Never touch the USB device port with your fi ngers. Doing so can cause malfunction.
z
z
z
z
USB mode
Storage
Player
en03_c-707i.indd 32 en03_c-707i.indd 32 12/19/2007 5:19:57 PM 12/19/2007 5:19:57 PM