Kenwood C-707I - Manual (Page 28)

C-707I 28
Notes on transporting or moving the system
Before transporting or moving this system, take the following actions:
1 Disconnect any iPod, USB fl ash memory, or USB audio player connected to the main unit. If there is a CD loaded in
the system, remove it.
2 Press the [CDE] key and check to make sure that “NO DISC” appears on the display.
3 Wait a few seconds and then turn the system off .
4 If there are any other components connected to the system, check to make sure they are all turned off before
disconnecting the cables.
Whenever moving the system, make sure you hold onto the main unit. The main unit may fall if you hold onto the speakers.
Important Information
en02_c-707i.indd 28 en02_c-707i.indd 28 12/28/2007 4:14:42 PM 12/28/2007 4:14:42 PM