Kenwood C-707I - Manual (Page 60)

60 C-707I
Playback from External Components
This section explains how to connect external components to the system and play back tracks.
External Components
Connect the external component to the system as described in
<Connecting Other (Commercially Available) Devices> (page 17).
When connecting external components, always turn this system and the external
components off beforehand.
Also refer to the instruction manual that comes with the external component being
connected.
z
z
2 2
Select AUX as the source.
3 3
Begin playback on the connected external component.
Perform the required operation on the connected external component to start
playback.
1 1
Connect the external component to the [AUX IN] terminal
on the back panel of the main unit.
Audio OUT
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
Press the [AUX] key.
D. AUDIO AUX
en08_c-707i.indd 60 en08_c-707i.indd 60 12/25/2007 11:44:53 AM 12/25/2007 11:44:53 AM