Kenwood C-707I - Manual (Page 78)

78 C-707I
Displayed Message Meaning
Can't READ *
(* is a number or symbol.) CD disc information cannot be read correctly.
R The disc is dirty. Clean the disc. (See <Care and Storage>.) (Page 83)
R Insert the disc correctly in the center of the inlet slot. (Page 30)
The CD is loaded the other way around.
R Load the CD correctly. (Page 30)
CD NO DISC There is no CD loaded. The CD cannot be recognized.
R Load a CD. (Page 30)
Er-CD01 The CD unit is not operating correctly.
R Request servicing.
NOT SUPPORT You are trying to play back data from a copyright protected WMA audio
fi le or from an unsupported fi le format.
There are no playable MP3 or WMA audio fi les.
REMOVE OK The USB device can be removed safely.
R Disconnect the USB device from the [ USB] port. (Page 33)
USB NO MEDIA A USB device is not connected. The USB device cannot be recognized.
R Check the connections. (Page 16)
** READING
(** is the media name.) The media's TOC *1 information is being read.
Messages
*1: In addition to audio signals, information called the Table of Contents (TOC) is recorded on each CD. The
TOC is similar to the contents page of a book and information such as the text, playing times and number
of tracks including some items that cannot be rewritten.
en12_c-707i.indd 78 en12_c-707i.indd 78 1/10/2008 9:49:38 AM 1/10/2008 9:49:38 AM