Kenwood HM-582MD - Manual (Page 16)

Menu mode
16
Preparation section
Basic section
Apprication section
Knowledge section
Contents
÷ Some items cannot be selected depending on the current
mode. “ ” blinks in this case. The cause can be displayed
by pressing the set key.
Current setting
Blinks
Display in menu mode
Menu mode
Each turn changes the displayed item.
“CD
=MD O.T.E.
?“ .... erty
“REC TNO MARK ?“ .............................. ›
“REC INPUT ?“ .............................. ›
“AUX D. LEVEL ?“ ...................... fi∏
“AUX A. LEVEL ?“ ...................... fi∏
“MONITOR ?“ .............................. ›
“TIMER SET ?“ ...................... as
“AUTOPOWERSAVE ?“ .............................. ^
“TIME ADJUST ?“ .............................. %
“AUTO MEMORY ?“ .............................. ¶
“CONTRAST ?“ .............................. &
“BACK LIGHT ?“ .............................. &
“BALANCE ?“ .............................. (
A
UX
A.L
EVEL
= AUX
T
IME
A
DJUST
12 : H
OUR
‰
TONE
“AUX A. LEVEL” is not available unless the input selec-
tor is set to “AUX”. Select the “AUX” input.
Option item
T
IME
A
DJUST
24 : H
OUR
TONE
1 Press the menu/demo key.
2 Select the item to be set.
3 Press the set key.
Set other items by repeating 2 and 3 for each.
m
e
n
u
/
d
e
m
o
volume/
multi-control
s
e
t
÷ The current setting is indicated by “3” and an option item is
indicated by “>”.
Operation in menu mode
When the power has been left ON for more than
30 minutes while the unit has been doing nei-
ther recording or playback in this period, the
A.P.S. function switches the power OFF
(standby) automatically. Whether the A.P.S.
function is to be used or not can be set with the
following steps.
Blinks
Auto Power Save (A.P.S.)
A
UTO
P
OWER
S
AVE
?
0 ON
‰
A.P.S.
12:30PM
÷ With the TUNER and AUX input, A.P.S. functions
only when the volume is set to zero.
÷ The LCD shows “A.P.S.” while this function is ac-
tive.
Lights
÷ The setting mode is canceled if no key or dial has been
operated for more than 20 seconds during the above.
1 Press the menu/demo key.
2 Rotate the volume/multi-control knob to
select “AUTOPOWERSAVE ?”, then press
the set key.
3 Select “ON” or “OFF” by rotating the vol-
ume/multi-control knob, then press the set
key.