Kenwood HM-582MD - Manual (Page 45)

45
Knowledge section
Preparation section
Application section
Basic section
Convenient Recording Methods
Contents
3
1
2
1 Insert a recordable disc into the MD recorder.
2 Insert disc in the CD player.
Make the preparations for recording.
Check the current play mode of the unit.
Start recording.
After recording , eject the MD.
4
To interrupt a recording
÷ After the track has been recorded, the MD recorder stops and
the CD player enters pause mode.
÷ When either CD playback or MD recording stops, the other
operation also stops.
÷ The digital input is recorded automatically.
÷ When you are operating the main unit, select “CD= = = = =MD
O.T.E.” in the menu mode, then select ”NORMAL SPEED”
and press the set key to start recording.
While “WRITING” is displayed, do not apply
shock or vibration to the unit because infor-
mation is being written on the Mini Disc.
Note Note
7
STOP
Select the desired CD track and play it.
6
CD
(Recording and playback will be stopped.)
Be sure to put the MD recorder in stop mode
One-touch edit normal-speed recording (O.T.E.) (NORMAL SPEED)
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
One-touch recording
÷ Even when the recording is started in the middle of the track,
playback restarts and recording start from the beginning of
the track.
MD O.T.E.
All track recording Single-track recording
If it is in play mode, stop it.
7
STOP