Kenwood HM-582MD - Manual (Page 38)

38
Various CD/MD playback features
Preparation section
Basic section
Application section
Knowledge section
Contents
Listening in the desired sequence
(program playback)
1
Check that the unit is in the stop mode.
2
3
Light the “PROGRAM” indicator.
Enter track Nos. in the order you want to play them.
4
Start playback.
Select the “CD” or“MD” input. )£
÷ Up to 32 tracks can be programmed. When “PGM FULL” is
displayed, no more tracks can be programmed.
÷ If you do not press the SET key before the track number
display stops blinking, the track number entry is canceled.
÷ With a CD containing CD text or MD containing title text, the
text is displayed scrolling on the LCD.
1 Select a track number using numeric keys.
÷ Tracks will be played in the order they were programmed (in
order of PGM-Nos.).
÷ When the 4 or ¢ key is pressed during play, the program
will jump to the preceding or the following track respectively.
÷ When the 4 key is pressed once during playback, the play
position returns to the beginning of the current track being
played.
Press the
7 STOP key.
Press the
6 key.
Press the PGM/CHARAC. key.
Blinks
If it is in play mode
Lights
Press the numeric keys as shown below....
To enter track No. 12 .... +10, 2
To select track No. 20 ... +10, +10, 0
\ \
Various CD/MD playback features
1 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7 PRS 8 TUV 9 WXY
+100
& ( ) - 0 QZ +10’
CD 00 01
0:00 0
A.P.S.
12:30PM
TONE
PROGRAM
A.P.S.
12:30PM
PGM-01: 07
Funny
TONE
PGM-01: 07
Funny son
TONE
SET
7
STOP
6
CD
6
MD
PGM
/CHARAC.
AUTO/MONO
Lights
2 Press the SET key.
3 Repeat steps 1 and 2.
Desired tracks in a disc can be programmed in the desired
order and played back. (Max. 32 tracks)
2 Programming 1 Track selection
CD/MD
6
7 STOP
PGM/CHARAC.
CLEAR/DELETE
Numeric keys SET
CD/MD 6
7 STOP set