Kenwood HM-582MD - Manual (Page 76)

76
In case of difficulty
Preparation section
Basic section
Apprication section
Knowledge section
Contents
Cleaning the CD insertion slot
Insertion slot and its surroundings
The CD insertion slot should be cleaned because it
tends to collect dust.
If a CD is inserted while dust is accumulated around
the insertion slot, the disc may be damaged.
Important Items
Maintenance
Maintenance of the unit
In regard to contact cleaner
Do not use contact cleaners because it could cause a
malfunction. Be specially careful not to use contact
cleaners containing oil, for they may deform the plastic
component.
When the front panel or case becomes dirty, wipe with
a soft, dry cloth. Do not use thinner, benzine, alcohol,
etc. for these agents may cause discoloration.
Caution on MD-Clip data
Do not attempt to record or edit a disc in which MD-Clip
data (still images, etc.) have been recorded. Otherwise,
the Clip data may be lost.
US and foreign patents licensed from Dolby Laborato-
ries.
Note related to transportation and movement
Before transporting or moving this unit, carry out the fol-
lowing operations.
1 Switch the power ON.
Stored contents which are
cleared immediately when
power plug is unplugged
from power outlet
Stored contents which are
cleared in at least a day af-
ter power plug is un-
plugged from power out-
let
Clock display
SOUND
“on/standby” status
(ON or STANDBY)
A.P.S.
Last input selection
Volume control value
Tone control levels
AUX input level
Balance setting
Rec levels
Rec input
Contrast setting
Backlight setting
Receiving band
Frequency
Preset stations
Auto/mono setting
Program timer setting
contents
Memory backup function
Memory Backup for the MD Recorder Section
The contents of the memory are not stored on the disc if
the power cord is unplugged.
If there is a power failure or if the power cord is un-
plugged, the recording or editing information (normally
recorded when the minidisc is removed) may be erased
or destroyed before it is recorded on the minidisc. Once
the information has disappeared, it can not be recovered.
After recording or editing, always remove the minidisc
to record the recording or editing information.
CD
NO DISC
MD
NO DISC
3 Turn the power OFF.
2 Select the CD or MD input, wait for a few seconds
and ensure that the LCD becomes as shown in
the figure below. If a disc is left in the main unit,
press the
0 key to eject it.