Kenwood HM-582MD - Manual (Page 46)

46
Preparation section
Basic section
Application section
Knowledge section
Convenient Recording Methods
Contents
3
1
2
1 Insert a recordable disc into the MD recorder.
2 Insert disc in the CD player.
Make the preparations for recording.
Check the current play mode of the CD player.
4
Start recording.
MD O.T.E.
After recording , eject the MD.
5
To interrupt a recording
While “WRITING” is displayed, do not apply
shock or vibration to the unit because infor-
mation is being written on the Mini Disc.
Note Note
Desired CD tracks can be programmed in the desired sequence and recorded onto an MD.
Program recording
(PGM mode+O.T.E.)
7
STOP
(Recording and playback will be stopped.)
Be sure to put the MD recorder in stop mode
If it is in play mode, stop it.
7
STOP
Program the desired sequence of CD tracks.
Perform steps
2 and 3 of the procedure in ”Listen-
ing in the desired sequence (program playback)”.
°
÷ Recording begins from the first track in the program and
completes when the entire program has been recorded.
÷ Recording stops automatically when the program playback of
the CD completes.