Kenwood HM-582MD - Manual (Page 59)

59
MD Edit Functions
Knowledge section
Preparation section
Application section
Basic section
Contents
During stop, all tracks can be erased. Be careful in using this operation because the tracks cannot be recovered
once the entire minidisc has been erased.
Select “Q. ERASE ?”.
1
Press the SET key
2
1 Press the TRACK EDIT key
3 Set it.
Erasing all tracks on a disc (ALL ERASE)
Eject the Mini Disc.
While “WRITING” is displayed, do not impact
or move the unit because information about
recording and editing is being written to the
Mini Disc.
4
Note Note
2 Select “Q. ERASE ?”
÷ Editing is aborted if no operation has been performed for 8
seconds.
Press while “ALL ?” is displayed.
Before using the editing function, press the PGM/
CHARAC. key so that “TRACK” lights.
TRACK EDIT
¢ 4
P.CALL
SET
SET
ENTER
WRITING
M D M D
EJECT NO DISC
TONE
A P S
TRACK
A.P.S.
12:30PM
TONE
A P S Information is
being written. Mini Disc has been
ejected.
Please execute operation in stopped condition.
0 Q.ERASE ?
EDIT
ALL .ERASE ?
Q.ERASE
Execute the track erasure operation.
3
Display after execution
“EDIT NOW”
: Editing
“COMPLETE” : When editing is completed suc-
cessfully
“CAN'T EDIT” : When editing is impossible
Even after completing MD editing, it is still possible
to cancel the settings in the current editing session
and restore the disc to the condition it was loaded
last time.
Note that this is possible provided that the MD is not
ejected yet.
ˆ