Konica Minolta Printer Copier - Manual (Page 132)

8 Error Displays and Other Indicators
8-4 Konica 7115/7118
8.2 When the Add Paper Indicator Lights
If paper runs out during a copy cycle, the Add Paper indicator lights up and the copy cycle is
stopped.
Identify the specific tray that has run out of paper on the control panel. Then, following the
procedure given in “Adding Paper” below, add paper as necessary.
Adding Paper
<1st Tray>
1 Slide out the 1st Tray.
? Do you know the special precautions to be used when
the tray has been slid out?
➜ Be careful not to touch the surface of the Paper Take-
Up Roll.
2 Press down on the Paper Lifting Plate until it clicks into
the locked position.
Paper Take-Up Roll
Paper Lifting Plate
Konica7115_7118.book Page 4 Friday, October 19, 2001 12:02 PM