Konica Minolta Printer Copier - Manual (Page 61)

Loading Originals 4
Konica 7115/7118 4-9
Books
When copying an open book or magazine, position the original as detailed below.
1 Raise the Automatic Document Feeder or Original Cover.
2 Position the book face down on the Platen Glass, with the
top of the book toward the rear of the copier and the
center of the open book aligned with the book mark
(
) on the scale.
? Are there any cautions when you place a book directly
on the Platen Glass?
➜ Do not place any object that weighs more than 6-1/2
lbs. on the Platen Glass. In addition, do not press
down hard on the book, as damage to the Platen
Glass could result.
3 Gently lower the Automatic Document Feeder or Original
Cover.
? Is a thick book or object being copied?
➜ Let the copier scan the original without lowering the Automatic Document Feeder or
Original Cover. Do not look directly at the Platen Glass surface during a scanning
sequence since a strong beam of light is emitted. This light beam is not, however, a laser
beam and is not as dangerous.
4 Make the Book Copy setting.
❍ Book Copy (p.6-3)
Konica7115_7118.book Page 9 Friday, October 19, 2001 12:02 PM