Konica Minolta Printer Copier - Manual (Page 72)

5 Making Copies
5-10 Konica 7115/7118
5 Enter the length (mm) of the paper on the KEYPAD.
? Do you know what is the range for the paper width of
custom size?
➜ The width can range from 90 mm to 297 mm.
? Do you want to change the value just entered?
➜ Press the [CLEAR] key and then re-enter the new
value.
? What are the precautions for entering a custom size?
➜ Note the conventions for the paper dimensions, width
and length.
6 Press the [ENTER] key.
7 Press the [CLEAR] key to clear the old value shown on
the Display.
8 Enter the length (mm) of the paper on the KEYPAD.
? Do you know the range for paper length of custom
size?
➜ The length can range from 140 mm to 432 mm.
? Do you want to change the value just entered?
➜ Press the [CLEAR] key and then re-enter the new
value.
9 Press the [ENTER] key.
✎
TIP
Enter the value by mm using the KEYPAD.
Refer to the conversion rate below.
1 inch = 25.4 mm
Width
Length
Konica7115_7118.book Page 10 Friday, October 19, 2001 12:02 PM