Konica Minolta Printer Copier - Manual (Page 14)

1 Introduction
1-6 Konica 7115/7118
USER INSTRUCTIONS
FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the interference
at his own expense.
WARNING: The design and production of this unit conform to FCC regulations, and any
changes or modifications must be registered with the FCC and are subject to FCC control. Any
changes made by the purchaser or user without first contacting the manufacturer will be subject
to penalty under FCC regulations.
This device must be used with shielded interface (Parallel) cable and shielded network (10/
100BaseT) cable.
This use of non-shielded cables is likely to result in interference with radio communications and
is prohibited under FCC rules.
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE3) (For Canada
Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Konica7115_7118.book Page 6 Friday, October 19, 2001 12:02 PM