Konica Minolta Printer Copier User Manual
Page 51
Before Making Copies
3
Konica 7115/7118
3-23
Precautions for Loading Paper
●
Be sure to adhere to the paper specifications for each tray (i. e., paper type, paper size, and
capacity). Otherwise, a paper misfeed can occur.
●
When loading paper measured in metric (A4, B4) in the tray, change “Paper Auto Detection”
in the User’s Choice mode. (p.7-9)
●
The metric indicator lights when the tray is loaded with paper measured in metric (A4, B4).
●
When loading nonstandard size paper in the 1st Tray, set “Custom Size Input” in the Utility
mode. (p.7-14)
●
When loading nonstandard size paper in the Bypass Tray, perform the “Custom Size Input
(Bypass Tray)” procedure under “Making Copies.” (p.5-9)
●
When loading Cards, OHP transparencies, or postcards in the 1st Tray, change “Paper
Type (1st Tray)” in the User’s Choice mode. (p.7-9)
●
When loading Cards, OHP transparencies, or postcards in the Bypass Tray, change “Paper
Type (Bypass Tray)” in the User’s Choice mode. (p.7-9
●
To disable Auto Paper or Auto Tray Switching with recycled paper loaded in the tray, change
“Special Paper Setting” in the User’s Choice mode. (p.7-9)
●
When loading paper of any FLS size other than the default setting (210 mm × 330 mm),
setting by your authorized Konica Service Representative is necessary. Consult your
authorized Konica Service Representative for this setting.
For information regarding loading paper, refer to “When the Add Paper Indicator Lights.” (p.8-4)
Konica7115_7118.book Page 23 Friday, October 19, 2001 12:02 PM