Kenwood XD-753 - Manual (Page 17)

Preparation section
17
You can change the display language manually.
1
Select “Language Options”.
2
Select the desired language.
Changing the display language
The following items can be selected by turning the
MULTI CONTROL jog dial.
“English”
“Français” (French)
“Deutsch” (German)
“Español” (Spanish)
“Italiano” (Italian)
“Language Options”
+Scrolled display (Language Options)
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Program Play”
“Recording Options”
“Tape Dubbing”
“Audio Options”
“Clock Options”
“Language Options”
MENU
SELECT
L O a n g u a g e
ENTER
MU
LTI CONTROL
MU
LTI CONTROL
When you do not recognize which language is displayed:
÷
Press the key and select “Language Options” (English), “Options de langue” (French),“Sprach-
Einstellungen” (German), “Opción Idioma” (Spanish) or “Opzioni lingua” (Italian), then select the desired
language.
When you press the key, a beep sounds. The number
of times that the beep sounds changes depending on
the operation.
When a beep sounds
Once: Normal operation
twice: The MENU or ENTER key is pressed.
three times: Abnormal operation (The error message
appears in the display.)
no sound: The key that cannot be operated is
pressed.
You can also set the beep to OFF:
About the beep sound
1 Select “Audio Options”.
MENU
SELECT
MU
LTI CONTROL
2 Select “Beep sound”.
SELECT
MU
LTI CONTROL
3 Select “Beep on” or “Beep off”.
SELECT
MU
LTI CONTROL
1 “Beep on”
2 “Beep off”