Kenwood XD-753 - Manual (Page 51)

Application section
51
For timer recording
1 Select the input source.
Select the recorded input source.
2 Select the broadcast station (only when TUNER
is selected above).
Select the preset station No.
+Scrolled display (Press 'ENTER' to Save, 'JOG' to check)
8
Press the ENTER key.
9
Put the unit in standby mode.
If you turn the MULTI CONTROL jog dial:
÷
The set program content items are displayed one after
another.
“Everyday” or “One Time”
= On time = Off time =
Mode = Input source = Preset channel (only tuner)
When you press the SELECT key, you can change the
settings. Operate the procedure from step
4 on page 50.
Lights
Adjust the clock before setting the timer.
Timer operation
7
Make the desired reservation.
1 “TUNER“ ........ Radio
2 “DVD/VIDEO“ .... External input
For timer playback or AI timer playback
1
Select the mode.
Select “Timer Play” or “AI Play”.
2 Select the input source.
Select the source to be played.
3
Select the broadcast station (only when
“TUNER” is selected above).
Select the preset station No.
1 “Timer Play” Timer play
2 “AI Play” .. Timer play with
gradually increas-
ing volume
1 “TUNER” ... Radio
2 “CD”
3 “TAPE”
4 “DVD/VIDEO” ... External input
÷
If the TIMER indicator is blinking now, set the time of the
day again.
p
SELECT
SELECT
SELECT
SELECT
SELECT
ENTER
0 0 3 F M 8 9 . 0
AUTO
ST.
0 0 3 F M 8 9 . 0
AUTO
ST.
P T r e s s ' E N
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
STANDBY
TIMER
STANDBY
TIMER