Connection with other components, Md recorder, dvd player, vcr or analog turntable, Optional or commercially-available equipment) – Kenwood XD-753 User Manual
Page 8: Caution, Digital out optical jack
8
Preparation section
L
R
DVD/VIDEO INPUT
DIGITAL OUT
OPTICAL
System connection
Connection with other components
(optional or commercially-available equipment)
Cap
Remove the cap and plug the optical-fiber cable.
Optical-fiber cable
(Provided with the MD
recorder)
÷
Insert the optical-fiber cable straight into the connector until it clicks.
÷
Be sure to attach the protection cap when the connector is not used.
÷
Never bend or bundle up the optical-fiber cable.
When an external system component is connected, please read the instruction manual of the
component as well.
Note
Note
Note
CAUTION
Note on Connection
Connect the components as shown in the diagram. Only plug the power cord into a power outlet once connec-
tions are completed. The rear panel configuration is varies depending on the model (countries or area).
Optical-fiber cable
MD recorder, DVD player, VCR or analog turntable
DIGITAL OUT OPTICAL jack
MD recorder
DVD player/VCR/analog turn-
table (P-110/optional)
Audio output
Digital
input
Audio
output
DIGITAL OUT
OPTICAL
For XD-753/653/XD-553/503
(Europe and U.K. only)