Kenwood XD-753 - Manual (Page 50)

50
Application section
Adjust the clock before setting the timer.
Timer operation
When the power is ON and neither recording nor playback is executed for 30 minutes or more, the
power is switched off automatically by this function.
1
Select “Clock Options”.
2
Select “Auto Power Save”.
3
Select “A.P.S. on” or “A.P.S. off”.
÷
The auto power save operation does not occur unless
program timer operation has completed.
÷
When the TUNER or DVD/VIDEO input is selected, this
function works only when the volume is set to zero or
the mute function is ON.
“A.P.S. off”
Auto power save is not used.
“A.P.S. on”
Auto power save is used.
“CD Program Play”
“Recording Options”
“Tape Dubbing”
“Audio Options”
“Clock Options”
“Language Options”
“Sleep Timer”
“Adjust Time”
“Timer Play”
“Auto Power Save”
4
Select “Everyday” or “One Time”.
÷
To cancel a timer operation, select “Timer off” under
“Timer Play” (in case of timer playback) or “Timer
Recording” (in case of timer recording).
The following items can be selected by turning the
MULTI CONTROL jog dial.
“Timer off” (Canceled)
“Everyday”
“One Time”
5
Enter the ON time.
6
Enter the OFF time.
+Scrolled display (Select on time)
+Scrolled display (Select off time)
÷
After entering the “hour”, enter the “minute” with the
same procedure.
÷
After entering the “hour”, enter the “minute” with the
same procedure.
÷
Set the timer recording program and timer playback
program by leaving an interval of 1 minute or more so that
their time ranges do not overlap.
The saved contents cannot be cleared. The con-
tents are cleared only when they are changed.
The time is
advanced The time is
returned
The time is
advanced The time is
returned
Auto Power Save
(For U.K. and Europe) (Other countries)
(For U.K. and Europe) (Other countries)
SELECT
SELECT
SELECT
MENU
SELECT
SELECT
ENTER
S e l e c t o n
m o n 7 : 0 0 a 0 o n 7 : 0
S f e l e c t o f
m f o f 7 : 0 0 a 0 o f f 7 : 0
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL