Kenwood KDC-MP642U - Manual (Page 19)

English | 19
HD Radio Tagging (iTunes Tagging)
Using an iTunes Tagging enabled HD Radio you can
tag your music. When you hear a song you enjoy
on your local HD Radio station, you only have to
press the Control knob. The song’s information
will then be saved on this unit. The saved songs
will then show up in a playlist called “Tagged” in
iTunes the very next time you sync your iPod to
your computer. So then you just need to click and
then easily buy and download the song you were
tagging directly from the Apple iTunes Music Store.
1 Enter HD Radio tagging mode
Press the Control knob.
“
TAG ” will be indicated on the display when song
information can be registered.
⁄
• Turn “ON” the “MENU” > “Tagging” of <Function Control>
(page 6) when using this function.
• Up to 50 TAGs (song’s information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
• The memory usage can be checked by selecting “MENU”
> “Tag Memory” of <Function Control> (page 6).
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2 Select Tuning item
Press the [DIRECT] button on the remote
control.
Pressing the [DIRECT] button each time switches
the following tuning items as follows.
Tuning item Display
Frequency “– – – –”
Channel “CH –”
Cancelling Direct Access Tuning —
3 Enter the frequency or Channel
Press the number buttons on the remote
control.
Example of frequency input:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4 Do Direct Access Tuning
Press the [ 4] or [¢] button.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.