Kenwood KDC-MP642U - Manual (Page 35)

English | 35
Favorite Name Setting
Giving a name to Preset Memory registered to
Favorite.
1 Enter Preset Recall mode
Turn the Control knob.
2 Retrieve the Preset Memory to change
Turn the Control knob.
3 Enter Favorite Name set mode
Press the Control knob for at least 1 second.
Select the “FAVORITE NAME SET” display.
4 Enter the name
Operation type Operation
Move the cursor to the enter
character position Push the Control knob towards right
or left.
Select the character type* Press the Control knob.
Select the characters Turn the Control knob or push it
towards up or down.
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
5 Exit Favorite Name Set mode
Push the Control knob towards right or left
to select “ENTER”, and then press the Control
knob.
Cancelling the Favorite Name set
Press the [FNC] button.