Function control – Kenwood KDC-MP642U User Manual
Page 8
8
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Function Control
Category
Item
Setting
Entry
Setting overview
Condition Page
“SP Select”*
“Front”*/
“F-R”/ “F-L”
Specify the voice output speaker.
*
“Call Beep”*
“ON”*/ “OFF”
Output a beep from the speaker when a call comes in.
*
“BT F/W Update”*
—
1 sec.
Display the firmware version and update the firmware.
38
“Beep”
“OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/
OFF.
—
“Clock Adjust”
—
1 sec.
Sets the clock.
—
26
“Date Adjust”
—
1 sec.
Sets the date.
26
“Date Mode”
7 types
1 sec.
Sets the date display mode.
26
“SYNC”
“OFF”*/ “ON”
Synchronizing the RDS station time data and this unit’s
clock.
—
“DSI”
“OFF”/ “ON”*
DSI (Disabled System Indicator) of the unit blinks when
the faceplate is removed.
—
“Illumi DIM”
“OFF”/ “AUTO”*
/ “MNAL1” /
“MNAL2”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
*
“ILM Effect”**
“OFF”/ “ON”*
Sets whether the key illumination color (KDC-X993/
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U)
is changed in conjunction with the key operation.
—
“ILM MSC SYNC”
“OFF”*/ “ON”
Sets whether the key illumination color (KDC-X993/
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U)
is changed in conjunction with the sound volume.
—
—
“Display”
“OFF”/ “ON”*
Turns off the display when no operation is performed.
—
*
“DISP DIM“
“OFF”/ “AUTO”*
/ “MNAL1” /
“MNAL2”
Dims the display part in conjunction with the light
switch of the vehicle.
*
“Contrast”
“1” - “10”
Adjusting the display contrast.
—
“DISP N/P”
“POSI1”/ “2”
/ “NEGA1”/ “2”
Switches the panel display between positive or
negative.
*
“AMP”
“OFF”/ “ON”*
Turns on/off the built-in amplifier.
*
“Zone2”
“REAR”*/
“FRONT”
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
*
“AMS Control”**
—
Controls the connected LX amplifier.
—
26
“TI”**
“OFF”*/ “ON”
Switches to the traffic information automatically when
the traffic bulletin starts.
—
“CRSC”***
“OFF”/ “ON”*
Switches to Monaural to decrease noise when
reception is poor.
—
“Receive Mode”
“AUTO”*/
“DIGITAL”/
“ANALOG”
1 sec.
Sets the receive mode of HD Radio.
*
“Tag Memory”
“00”- “50”
Displays the tag memory usage of HD Radio. Up to 50
tags can be registered to this unit.
19
“Tagging”
“0FF”/ “ON”*
Turns ON / OFF the tag memory function of HD Radio.
19
“ESN=”
—
Displays the Electronic Serial Number of satellite radio.
—
“Name Set”
—
1 sec.
Sets the display when switched to AUX source.
12
“Scroll”
“Auto”*/
“Manual”
Specifies whether the text is scrolled automatically.
—
—
“Favorite Delete”
—
1 sec.
Deletes Favorite Preset Memory.
34
“Built in AUX”
“OFF”*/ “ON”
Sets whether to display AUX during source selection.
—
“CD Read”
“1”*/ “2”
Sets the CD read mode.
*
“DEMO Mode”
“OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—
27