Satellite radio tuner (optional accessory) control – Kenwood KDC-MP642U User Manual
Page 42
42
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
2
Enter the channel
Press the number buttons.
3
Do Channel Search
Press the [
4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
• If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
“ACQUIRING SIGNAL”/ “NO SIGNAL” appears.
Channel Scan
Every receivable Channel is checked for 10 seconds.
1
Start Channel Scan
Select “Channel Scan”.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Release it when the channel you want to listen
to is received
Press the Control knob.
Satellite Radio tuner (Optional Accessory) control