Kenwood KDC-MP642U - Manual (Page 53)

English | 53
Accessory of KDC-X993
Installation the Microphone Unit
1 Check the installation position of the microphone
(accessory 5).
2 Remove oil and other dirt from the installation
surface.
3 Install the microphone.
4 Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory5
⁄
• Install the microphone as far as possible from the cell-
phone.