Kenwood KDC-MP642U - Manual (Page 38)

38 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Bluetooth Setup
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1 Select Bluetooth device deletion mode
Select “MENU” > “Device Delete”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Bluetooth device deletion mode
Press the Control knob for at least 1 second.
“(name)” is displayed.
3 Select the Bluetooth device
Turn the Control knob.
4 Delete the selected Bluetooth device
Press the Control knob.
5 Turn the Control knob to select “YES”, and then
press the Control knob.
“Delete” is displayed.
6 Exit Bluetooth device deletion mode
Press the [FNC] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1 Enter Bluetooth Firmware update mode
Select “MENU” > “BT F/W Update”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second.
The firmware version appears.
3 Exit Bluetooth Firmware update mode
Press the [FNC] button.
⁄
• For how to update the firmware, access our web site.
http://www.kenwood.com/bt/information/
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1 Select Phonebook name edit mode
Select “BT” > “Voice Tag” > “PB Name Edit”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Phonebook name edit mode
Press the Control knob.
3 Search for the name to register
Select the name to register with reference to 4 in
<Calling a number in the Phone Book> (page 22).
If a voice tag has already been registered for a
name, “*” is displayed before the name.
4 Select a mode
Turn the Control knob.
Display Operation
“PB Name Regist” Register a voice tag.
“PB Name Check”* Play a voice tag.
“PB Name Delete”* Delete a voice tag.
“Return” Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “PB Name Regist” (Regist)
5 Register a voice tag (first)
Press the Control knob.
“Enter Voice 1” is displayed.
When a beep is heard, utter a voice tag within 2
seconds.
6 Confirm the voice tag (second)
Press the Control knob.
“Enter Voice 2” is displayed.
When a beep is heard, utter the same voice tag as
that you uttered in step 4 within 2 seconds.
“Completed” is displayed.
7 End registration
Press the Control knob.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [AUD] knob allows you to retry
voice input. (page 54)
Select “PB Name Check” (Play)
5 Press the Control knob.
Play the registered voice and return to step 2.
Function of KDC-X993
KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory)