Using the settings menu – Kodak Scanners i800 Series User Manual
Page 25
Advertising
3-8
A-61169 July 2003
Performing a patch test
Use this test to verify that the Patch Reader is operational and that your
patches are within specification.
To perform a patch test:
1. Select the Diagnostics Settings menu
icon.
2. Use the right or left arrow to navigate to the Diagnostics function.
3. Press the down arrow until Run Patch test is displayed on the
Operator Control Panel.
4. Select Return.
5. Feed a document(s) with a patch(es).
6. Press Start/Resume . When the documents have been scanned, the
document count and number of patch types recognized by the
scanner will be displayed.
7. Press Stop/Pause.
Advertising