Changing the output tray side guides – Kodak Scanners i800 Series User Manual

Page 66

Advertising
background image

A-61169 July 2003

5-23

7. Turn the tray right-side up, reinstall the end stop and verify the guides

move freely.

8. Replace the output tray.

Changing the output
tray side guides

The output tray comes with a set of short and tall side guides, which can
be easily changed.

Tools needed: Phillips Head Screwdriver

1. Remove the output tray.

2. Remove the end stop.

3. Turn the tray upside down.

4. Use the screwdriver to release the screws.

5. Turn the tray over and remove the short (or tall) side guides.

Advertising